inkl. MwSt. zzgl. Versandkosten
Sofort versandfertig, Lieferzeit ca. 1-3 Werktage
- Hersteller-Nr.: N/A
- EAN: 6958265106019
- Artikel-Nr.: ZM0003
- Lagerort: B0.2
- Staffelung: 1
- Mindestabnahme: 1
- Maximalabnahme: 1
The Zenmuse Z15-N7 3-Axis Gimbal for Sony NEX-7 from DJI performs two key functions: keeping the camera level and providing stabilization, thus helping you transform a larger multi-rotor UAV, such as the S1000+ or S900, into a platform for professional aerial video and aerial photography. Featuring ±0.01° control angle accuracy, the Zenmuse Z15-N7supports three operation modes; two optimized for aerial video and photo use and one for FPV (first person view) applications. The gimbal is operated using a dedicated stick on your transmitter (hand-held radio controller), and the receiver must have at least four free channels that can be assigned to gimbal operation.
Each version of the Z15 Gimbal is designed for a specific camera and lens combination. This version is for the Sony NEX-7 with the Sony SEL16F28 16mm f/2.8 lens. Additionally, it is specifically balanced for this precise setup. Additions to the camera or lens, such as filters, can increase the weight and alter the weight distribution potentially damaging the gimbal.
Note: Installation may require soldering.
The Z15 Gimbal requires a larger multi-rotor UAV aircraft, such as the S1000+ or S900, that has installed either the A2 or WooKong-M flight control system. Depending on the system, the Z15 Gimbal is installed in, additional separately available electronics and mounting hardware may be required. apart from the flight control system, the receiver must have at least four open channels, and the transmitter must be programmable to support gimbal operation.
3-Axis Rotation Control
The control method is designed to be simple and intuitive: the gimbal-assigned transmitter stick has direct control over the relative rotation speed. The design incorporates a tail potentiometer to increase control, stability, and precision, and the internal slip rings avoid needlessly complicated wiring. Both the power and signal lines are integrated into the tubes of the gimbal, which provides unhindered control axes, allowing the gimbal to pan and tilt ±360° and roll ±40°.
Multiple Control Modes
Orientation-locked Control Mode: Keeps the gimbal locked with the aircraft nose direction.
Non-Orientation-locked Control Mode: Gimbal point stays the same regardless of which way the nose is pointing.
Back to Mid-point Mode (FPV Mode): Centrally locks the gimbal in the direction of the nose. In this mode the leveling and stabilizing functionality of the gimbal is negated.
Built-in Independent IMU
Integration of the IMU Module helps reduce the amount of wiring required for installation. Plus, the gimbal provides a specially designed and customized video output module.
Gimbal Servo Drive Module
Following in the tradition of previous Zenmuse gimbals, the Z15 features high precision control characteristics demanded by professional users. With high precision, low vibration, and high torque characteristics, this module helps provides additional camera stabilization.
Windows Assistant Software
Firmware updates, diagnostic testing, and other critical maintenance will require the use of the computer-based Assistant Software. This software requires Windows 8, 7, XP SP3 in 32- or 64-bit versions.
Camera Shutter Control Supported
With a properly configured transmitter it is possible to trigger the camera's shutter release remotely at the ground-end thanks to the integrated shutter control module.
Video Output for Wireless Transmission
A video feed from the Sony NEX-7's HDMI or AV port is relayed through the gimbal so that it can be connected to a video transmitter or OSD module for FPV and ground-end monitoring.